Tool (Number and name) |
Illustration |
Use |
09977-25100 Disc & hub assembly bolt remover |
|
Removal and installation of disc & hub assembly. |
Replacement
Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper
body (A).
Tightening torque:
21.6 ~ 31 ...
26 Brake Control Solenoid Valve(26/B_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Front Stabilizer Link Inpesction
Check the front stabilizer link ball joint for damage.
-
Torn boot
-
Opened boot
-
Displaced ring
...