Kia Rio Manuals

Kia Rio: Inspection - Timing System - Engine Mechanical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Inspection

Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm
1.
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear, cracks or damage. Replace if necessary.
2.
Check a contact surface of the chain tensioner arm and guide for abnormal wear, cracks or damage. Replace if necessary.
3.
Check the hydraulic tensioner for its piston stroke and ratchet operation. Replace if necessary.
Belt, Idler, Pulley
1.
Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
2.
Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.
3.
Check the pulleys for vibration in rotation, oil or dust deposit of V-ribbed part. Replace if necessary.

     
•
Do not bend, twist or turn the timing chain inside out.
•
Do not allow the timing chain to come into contact with oil, water and steam.
Removal
Engine removal is not required for this procedure.    • Use fender covers to avoid damaging ...

Installation
1. Dowel pin of crankshaft setted about 3° with vertical center line. 2. Align the TDC marks (A) of the CVVT sprockets with the upper s ...

See also:

Tilting the sunroof
To open the sunroof, push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof, push the sunroof lever forward or pull downward until the sunroof ...

Line Pressure Control Solenoid Valve Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Specification
Air Conditioner Item Specification Compressor Type DVE12 (Externally Controlled Variable Swash Plate Type) Oil type & Capacity PAG ...

Categories

Copyright www.kirmanual.com 2014-2026