Kia Rio Manuals

Kia Rio: Installation - CVVT & Camshaft - Cylinder Head Assembly - Engine Mechanical System - Kia Rio UB 2012-2025 Service ManualKia Rio: Installation

1.
Install the intake CVVT (A) and exhaust CVVT (B).
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)



     
When installing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench.


2.
Install the camshaft bearing caps (A) with the order below after setting the intake camshaft and exhaust camshaft on the cylinder head.
Tightening torque
1st step
M6 bolt : 5.9 N.m (0.6 kgf.m, 4.3 lb-ft)
M8 bolt : 9.8 N.m (1.0 kgf.m, 7.2 lb-ft)
2nd step
M6 bolts :
11.8 ~ 13.7N.m (1.2 ~ 1.4kgf.m, 8.7 ~ 10.1lb-ft)
M8 bolts :
18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)


3.
Install the exhaust oil control valve (OCV) adapter (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)


4.
Install the timing chain.
(Refer to Timing System)
5.
Install the timing chain cover.
(Refer to Timing System)
6.
Install the cylinder head cover.
(Refer to Timing System)
Inspection
Camshaft Assembly 1. Inspect the cam height. Using a micrometer, measure the cam height. Cam height Intake : 44.15mm (1.7382in ...

Cylinder Head
...

See also:

Ignition Coil: Removal
1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

 Brake fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Winter driving
Severe weather conditions in the winter result in greater wear and other problems. To minimize the problems of winter driving, you should follow these suggestions: Snowy or Icy conditions To dri ...

Categories

Copyright www.kirmanual.com 2014-2025