Kia Rio: Cylinder Head

Installation

1. Install the intake CVVT (A) and exhaust CVVT (B). Tightening torque : 63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft) ...

Components

1. Cylinder head cover 2. Cylinder head cover gasket 3. Cylinder head assembly 4. Cylinder head gasket 5. Camshaft position sensor 6. Camshaft bearing cap 7. Camshaft ...

See also:

Towing
Towing service If emergency towing is necessary, we recommend having it done by an authorized Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to ...

Installation
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...

Water pump: Inspection
1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. 2. Check the bearing for damage, abnorma ...