Kia Rio: Specifications - Emission Control System - Kia Rio UB 2012-2026 Service ManualKia Rio: Specifications

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
Pressure [kPa (kgf/cm², in H2O)]
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5

Canister Close Valve (CCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.8 ~ 21.8 [20°C(68°F)]

Description
Emissions Control System consists of three major systems. • The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system re ...

Tightening Torques
Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.8 ~ 1.2 7.8 ~ 11.8 5.8 ~ 8.7 Canister installati ...

See also:

Components
1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder assembly ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Installation
1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine charging Sy ...

Copyright www.kirmanual.com 2014-2026