Kia Rio: Curtain Airbag (CAB) Module Description - Airbag Module - Restraint - Kia Rio UB 2012-2019 Service ManualKia Rio: Curtain Airbag (CAB) Module Description

Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.

     
Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Side Airbag (SAB) Module Installation
   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Curtain Airbag (CAB) Module Components
...

See also:

Foot Actuator (With Auto Defogging System) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the foot connector. 3. Verify that the foot actuator operates to ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

BJ Boot Components
1. BJ assembly 2. Circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 1 ...

Copyright © www.kirmanual.com 2014-2019