Kia Rio: Installation - Clutch Master Cylinder - Clutch System - Kia Rio UB 2012-2025 Service ManualKia Rio: Installation

1.
Installation is the reverse of removal.

     
Perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.
(Refer to "clutch release cylinder" in CH group.)
Removal
   • Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does ...

Clutch Release Cylinder
...

See also:

Inspection
1. Check the brake tubes for cracks, crimps and corrosion. 2. Check the brake hoses for cracks, damage and fluid leakage. 3 ...

Photo Sensor (FATC only) Description
The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving port ...

Auto Defogging Sensor (FATC only) Inspection
1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

Copyright www.kirmanual.com 2014-2025