Kia Rio: Clutch Release Cylinder

Installation

1. Installation is the reverse of removal.    • ...

Components

1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return spring 10. Piston 11 ...

See also:

Auto Defogging Sensor (FATC only) Inspection
1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

Alternator: On-vehicle Inpection
   • Check that the battery cables are connected to the correct terminals. ...