Kia Rio: Back-up Lamp Switch Description

Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp.

Shift Lever Adjustment

1. In neutral position, disjoin select cable (A) from shift lever assembly pin (B). 2. Disconnect select adjuster (A) to an arrow. ...

Back-up Lamp Switch Specifications

1. Working voltage: DC 10~15V 2. Operating force: 3.0kg Max. 3. Voltage drop: - 0.4V 4. ...

See also:

Components Location
1. Audio unit 2. Tweeter speaker 3. Roof antenna (Radio + SDARS) 4. Antenna cable connector 5. Front door speaker 6. Rear door speaker 7. Antenna feeder cable ...

Photo Sensor (FATC only) Replacement
1. Disconnect the negative (-) battery terminal. 2. With a flat-head screwdriver, remove the photo sensor (A) from the center of defrost no ...

Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...