Kia Rio: Output Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2025 Service ManualKia Rio: Output Speed Sensor Specifications

▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.85 ~ 1.3)
0.0335 ~ 0.0512
Output voltage
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides ...

Output Speed Sensor Circuit Diagram
...

See also:

Engine oil
Checking the engine oil level 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes ...

Description
Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, intake manifo ...

Windshield Wiper-Washer Switch Installation
1. Install the wiper switch. 2. Install the steering column upper and lower shrouds. ...

Copyright www.kirmanual.com 2014-2025