Kia Rio: Output Speed Sensor Installation
| 1. |
Installation is the reverse of removal.
|
After replacement or reinstallation procedure of the valve body
assembly, must perform procedures below.
|
Output Speed Sensor Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Torque Converter Control Solenoid Valve (T/CON_VFS) Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque converter.
...
See also:
Head lamp leveling Actuator Installation
1.
Install the head lamp leveling actuator by turning the adjusting
gear.
2.
Install the head lamp assembly.
3.
...
Tire Installation
1.
Apply tire soap or lubrication to the top and bottom tire beads.
2.
To fit the bottom bead, position the valve at the 5 o’clock posit ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
Copyright © www.kirmanual.com 2014-2024