Kia Rio: Torque Converter Control Solenoid Valve (T/CON_VFS) Description

Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter.

Output Speed Sensor Installation

1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA ...

See also:

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect igni ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS termi ...