Kia Rio: Line Pressure Control Solenoid Valve Circuit Diagram

Line Pressure Control Solenoid Valve Specifications

Direct control VFS[LINE Pressure] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current ...

Line Pressure Control Solenoid Valve Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Spark Plug: Installation
1. Install in the reverse order of removal. Spark Plug Installation : 14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft) ...

Brake Switch Removal
1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group-"crash pad") 3. ...

SRS Control Module (SRSCM) Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...