Kia Rio: Front Hub / Knuckle Disassembly
|
1. |
Remove the snap ring (A).
|
|
2. |
Remove the hub assembly from the knuckle assembly.
|
(1) |
Install the front knuckle assembly (A) on press.
|
|
(2) |
Lay a suitable adapter (B) upon the hub assembly shaft.
|
|
(3) |
Remove the hub assembly (C) from the knuckle assembly
(A) by using press.
|
|
|
3. |
Remove the hub bearing inner race from the hub assembly.
|
(1) |
Install a suitable tool (A) for removing the hub bearing
inner race on the hub assembly.
|
|
(2) |
Lay the hub assembly and tool (A) upon a suitable adapter
(B).
|
|
(3) |
Lay a suitable adapter (C) upon the hub assembly shaft.
|
|
(4) |
Remove the hub bearing inner race (D) from the hub assembly
by using press.
|
|
|
4. |
Remove the dust cover (A).
|
|
5. |
Remove the hub bearing outer race from the knuckle assembly.
|
(1) |
Lay the hub assembly (A) upon a suitable adapter (B).
|
|
(2) |
Lay a suitable adapter (C) upon the hub bearing outer
race.
|
|
(3) |
Remove the hub bearing outer race from the knuckle assembly
by using press.
|
|
|
6. |
Replace hub bearing with a new one.
|
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
See also:
Engine compartment
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake/clutch fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer ...
Cluster Ionizer (FATC only) Description
The cluster ionizer helps to clean up odors in the vehicle or from the
air-conditioner system.
When the ignition switch ON, the inoizer runs a "CLEAN" mode and then
a "ION& ...
Rear Door Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration,
and re ...
Front Hub / Knuckle Replacement
Front Hub / Knuckle Reassembly