Kia Rio: TPMS Sensor Removal - Tire Pressure Monitoring System - Suspension System - Kia Rio UB 2012-2026 Service ManualKia Rio: TPMS Sensor Removal


     
Handle the sensor with care.
1.
Remove the tire. (Refer to "Tire Removal")
2.
Remove the valve nut.



     
The valve nut should not be re-used.
3.
Discard the valve assembly.
TPMS Sensor Description
1. Mode (1) Normal Fixed Base State A. Sensor transmissions continue at the Low Line ...

TPMS Sensor Replacement
Repair tire after using the Tire Mobility Kit (TMK) When the TPMS warning lamp OFF 1. Remove the TMK repaired tire, wheel and TPMS sensor. (Refer to ...

See also:

Fuel Filler Cap
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...

Front Hub / Knuckle Disassembly
1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the ...

Door Switch Installation
1. Install is reverse of removal. ...

Copyright © www.kirmanual.com 2014-2026