Kia Rio: TPMS Receiver Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
| 1. |
Connect self-diagnosis connector(16pins) located in the lower
of driver side crash pad to self-diagnosis device, and then turn the
self-diagnosis device after key is ON.
|
| 2. |
Select the "vehicle model" and "TPMS" on GDS vehicle selection
screen, then select OK.
|
[Vehicle name input initialization]
[Vehicle Name Writing 1]
[Vehicle Name Writing 2]
|
[Vehicle Name Writing 3]
[VIN input initialization]
[VIN Writing 1]
[VIN Writing 2]
[VIN Writing 3]
TPMS Receiver Replacement
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
Steering System
...
See also:
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10 ...
Transaxle Control Module (TCM) Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensu ...
Heater & A/C Control Unit (FATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater & A/C controller (A) from the center facia using
a flat-head scre ...
Copyright © www.kirmanual.com 2014-2024