Kia Rio Manuals

Kia Rio: Weight Classification System (WCS) Removal - SRSCM - Restraint - Kia Rio UB 2012-2026 Service ManualKia Rio: Weight Classification System (WCS) Removal

1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat assembly.
(Refer to the Body group - "Seat")
3.
Remove the seat track assembly.
(Refer to the Body group - "Seat")

     
•
There are several DTC cases, please check below status.
Case A
 B1763 OCS ECU Defect
Case B
 B1323 OCS Sensor Defect
Case C
 B1319 OCS Required Weight Check
Case D
 B1697 ACU Communication error

•
Case A. B. Remove the seat track assembly of the front passenger seat . After replacing, perform WCS reset and DTC clear.
•
Case C. Perform WCS reset and accuracy check, if accuracy check result is accepted and DTC is historic, WCS can be re-used.
•
Case D. Check wirings and connectors. If there is no DTC after WCS reset and DTC clear, WCS can be re-used.
Weight Classification System (WCS) Components
...

Weight Classification System (WCS) Installation
   WCS(Weight Classification System) is utilizing a robust weight measuring technology. Thus, if any of the following condi ...

See also:

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.85 ~ 1.3) 0.0335 ~ 0.0512 Output vo ...

Driving your vehicle
Be sure the exhaust system does not leak. The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the ex ...

Waveform
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these sig ...

Categories

Copyright www.kirmanual.com 2014-2026