Kia Rio: Components

Master Cylinder

...

Removal

1. Turn ignition switch OFF, and disconnect the negative (-) battery cable. 2. Remove the battery and ECM. (Refer to the Engine Ele ...

See also:

Inspection
1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. Valv ...

Specification
Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 101.3 (1.03, 14.7) 4 ...

Antenna Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable and the connector (A). ...