Front Brake Pads |
1. |
Remove the brake hose mounting bracket bolt (A).
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper (C) up out
of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
Trunk
Opening the trunk
With the trunk lid release lever To open the trunk from inside the vehicle, pull
up the trunk lid release lever.
The trunk will automatically lock when the trunk lid closes.
& ...
Seat Heater Switch Installation
1.
Install the seat heater switch.
2.
Install the console assembly.
3.
Connect the battery (-) terminal.
...
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...