Kia Rio: Hood Adjustment
Hood Adjustment
| 1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
|
| 2. |
Adjust the hood height by turning the hood over slam bumpers (C).
|
| 3. |
After loosening the hood latch (D) mounting bolts and nuts, adjust
the latch by moving it up or down, or right or left.
|
Hood Replacement
Hood Assembly Replacement
•
When removing and installing the hood, an assistant is
...
Trunk Lid Replacement
Trunk Lid Assembly Replacement
•
When removing and installing the trunk lid, an assistant ...
See also:
Intake Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad.
(Refer to BD group - "Crash Pad")
...
Compressor Installation
1.
Make sure of the length of compressor mounting bolts, and then
tighten it with the specified tightening order.
Tightening torque :
...
Rear Shock Absorber Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2026 Owners Manual
- Kia Rio YB 2017-2026 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2026