Kia Rio: Shift Lever Components - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: Shift Lever Components


1. Shift lever knob
2. Shift lever assembly
3. Control cable
4. Shift lock cable assembly
5. Retainer
6. Brake pedal assembly

Inhibitor Switch Installation
1. Check that the shift lever is placed in the "N" position 2. Install the inhibitor switch (A). ...

Shift Lever Removal
Shift Lever Assembly Replacement 1. Remove the center console. (Refer to "interior (console)" in BD group) 2. Di ...

See also:

Installation
1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1 lb-ft) ...

Hood
Opening the hood 1.Pull the release lever to unlatch the hood. The hood should pop open slightly. Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P( ...

In car sensor (FATC only) Description
The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the r ...

Copyright © www.kirmanual.com 2014-2019