Kia Rio: Smart key unit Component

Smart Key

Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. 2. ...

Smart key unit Circuit diagram

No. Connector A(26 pins) No. Connector B(16 pins) No. Connector C(22 pins) 1 VBAT_LOAD 1 C_CAN_L 1 O_S ...

See also:

Rear combination lamp Removal
Rear combination lamp (Inside) [4 Door] 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk trim. (Ref ...

Transaxle Control Module (TCM) connector and terminal function
...

Installation
1. Install the intake CVVT (A) and exhaust CVVT (B). Tightening torque : 63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft) ...