Kia Rio: Specification - Variable Intake Solenoid (VIS) Valve - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Specification

Item
Specification
Coil resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]

Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or ...

Circuit Diagram
(M/T) (A/T) ...

See also:

Installation
1. Installation is the reverse of removal.    If the oil seal on the transaxle case side is da ...

Cluster Ionizer (FATC only) Inspection
1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

Evaporator Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistan ...

Copyright © www.kirmanual.com 2014-2019