Kia Rio: Specifications - Keyless Entry And Burglar Alarm - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Specifications

Item
Specification
Rated voltage
DC 3V
Service voltage range
DC 2.7V ~ 3.5V
Temperature range
-4F ~ 140F (-20C ~ +60C)
Storage temperature range
-40F ~ 185F (-40C ~ +85C) (Without battery)
Modulation method
FSK
Keyless entry transmitter Power source
Lithium 3V battery (1EA)
Transmissible distance
10m or more
Life of battery
2 years or more (at 20 times per day)
Button
3 (Door lock, Door unlock, Tailgate unlock)
Transmission frequency
315 MHz

Keyless Entry And Burglar Alarm
...

Component Location
1. Tailgate actuator & switch 2. Rear door switch 3. Body control module 4. Key warning switch 5. Front door switch 6. Front door lock actuator & switch 7. Rear do ...

See also:

TPMS Sensor Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Hands free mic Inspection
1. Disconnect the negative(-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - "Roof trim") ...

Copyright www.kirmanual.com 2014-2020