Kia Rio: Specifications
| Items |
Specification |
|
| Hood |
Type |
Rear hinged, front opening type |
| Front Door |
Construction |
Front hinged, full door construction |
| Regulator system |
Wire-drum type |
|
| Locking system |
Pin-fork system |
|
| Rear Door |
Construction |
Front hinged, full door construction |
| Regulator system |
Wire-drum type |
|
| Locking system |
Pin-fork system |
|
| Trunk Lid |
Type |
Torsior bar type |
| Tail Gate |
Type |
Front hinged, gas lifter type |
| Seat Belts |
Front |
3 point type with Emergency Locking Retractor (E.L.R) |
| Rear |
3 point type with Emergency Locking Retractor (E.L.R) 2 point type |
|
Sealant
| Applied parts |
Bead width |
| Windshield Glass |
Height : 12 mm (0.4724 in.) |
| Width : 8 mm (0.3150 in.) |
Tightening Torque
Items
N.m
kgf.m
lb-ft
Front and rear doors
Door hinge to body
34.3 ~ 41.2
3.5 ~ 4.2
25.3 ~ 30.4
Door hinge to door
...
See also:
Side Impact Sensor (SIS) Description
Side Impact Sensor (SIS) system consists of two P-SIS which are installed
at each center of the front door module (LH and RH) and two SIS which are installed
at each center pillar nearby (LH ...
Front Stabilizer Bar Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the front stabilizer bar for deformation.
3.
Check th ...
Removal
1.
Remove the trunk trim in the trunk after removing the screws and
clips.
(Refer to the BD group - "Tailgate")
2.
Remove ...
Copyright © www.kirmanual.com 2014-2024