Kia Rio: SS-A Solenoid Valve(ON/OFF) Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2021 Service ManualKia Rio: SS-A Solenoid Valve(ON/OFF) Description

SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body.

SS-A Solenoid Valve(ON/OFF) Specifications


Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

SS-A Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(&# ...

See also:

Seats
...

Front Fog Lamps Installation
1. Install the fog lamp. 2. Reconnect the fog lamp connector. 3. Connect the negative (-) battery terminal. ...

Waveform
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these sig ...

Copyright © www.kirmanual.com 2014-2021