Kia Rio: SS-A Solenoid Valve(ON/OFF) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: SS-A Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10 ~ 11

SS-A Solenoid Valve(ON/OFF) Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

SS-A Solenoid Valve(ON/OFF) Circuit Diagram
...

See also:

SS-B Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater & blower unit assembly. (Refer to HA group – “He ...

Line Pressure Control Solenoid Valve Description
line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...

Copyright © www.kirmanual.com 2014-2019