Kia Rio: Start/Stop Button Removal - Button Engine Start System - Body Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Start/Stop Button Removal

1.
Disconnect the negative(-) battery terminal.
2.
Remove the Audio.
(Refer to the BE group - "Audio")
3.
Disconnect the start/stop button connector (A).


4.
Remove the start/stop button (A) after removing the screws.


Start/Stop Button Component
...

Start/Stop Button Installation
1. Install the start/stop button. 2. Install the Audio. ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor connecto ...

Front Wheel Alignment
   When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always ...

Thermostat: Installation
1. Place the thermostat in the block. Install the thermostat (B) with the jiggle valve upward. 2. Install the water inlet fitting (A). ...

Copyright © www.kirmanual.com 2014-2019