Kia Rio: Starter: Specification - Starting System - Engine Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Starter: Specification

Starter [Non-ISG type]
Item
Specification
Rated voltage
12 V, 0.9 kW
The number of pinion teeth
10
Performance
[No-load, 11.5 V]
Ampere
Max. 60 A
Speed
Min. 5,500 rpm

Starter [ISG type]
Item
Specification
Rated voltage
12 V, 1.3 kW
The number of pinion teeth
11
Performance
[No-load, 12 V]
Ampere
Max. 95 A
Speed
Min. 3400 rpm

Starter: Description
The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...

Starter: Components
1. Screw 2. Front housing 3. Stop ring 4. Stopper 5. Overunn clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch assembly 10. Armature assemb ...

See also:

Compressor Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it with the specified tightening order. Tightening torque : ...

Oil Pump Unit (OPU) Removal
1. Remove the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to УCrash padФ in BD group.) ...

Components Location
[Vehicle Components] 1. Automatic transaxle 2. Transaxle control module (TCM) 3. Shift lever 4. Data Link Connector (DLC) [Transaxle Components] ...

Copyright © www.kirmanual.com 2014-2019