Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description

Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brake.

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications


35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

See also:

 Brake fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Fuel Filler Cap
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...

Instrument panel vents
The outlet vents can be opened or closed separately using the thumbwheel. Also, you can adjust the direction of air delivered from these vents using the vent control lever as shown. Temperature ...

Copyright © www.kirmanual.com 2014-2019