Kia Rio: Valve Body Description - Hydraulic System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: Valve Body Description

The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.

Valve Body Components Location


Fluid Replacement
   ATF of 6 speed automatic transaxle doesn’t need to be replaced. If the vehicle is used severely in business or personal ...

Valve Body Components Location
1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor 4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Under drive brake (UD/B) pressur ...

See also:

Manual transaxle
Manual transaxle operation The manual transaxle has 6 forward gears. This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized in all forward gears so shifting to ei ...

Antenna Inspection
Antenna Cable 1. Remove the antenna jack from the audio unit and antenna. 2. Check for continuity between the center poles of antenna cable. ...

Fuel requirements
Your new Kia vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performa ...

Copyright © www.kirmanual.com 2014-2019