Kia Rio: Curtain Airbag (CAB) Module Removal

1.	Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.

2.	Remove the roof trim. (Refer to the Body group - "Interior")

3.	Disconnect the curtain airbag harness connector (A).

4.	After loosening the mounting bolts remove the curtain airbag.

Curtain Airbag (CAB) Module Components

...

Curtain Airbag (CAB) Module Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

See also:

ESC Control Module Installation
1. Installation is the reverse of removal. 2. Tighten the HECU mounting bolts and nuts to the specified torque. 3. ...

Heater & A/C Control Unit (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

Auto Defogging Sensor (FATC only) Inspection
1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

Categories

Copyright © www.kirmanual.com 2014-2026