Kia Rio: Heater & A/C Control Unit (MANUAL) Schematic Diagram

Heater & A/C Control Unit (MANUAL) Components

Connector pin function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 Intake Actu ...

Heater & A/C Control Unit (MANUAL) Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

See also:

Rear Washer Switch Inspection
1. With the rear wiper & washer switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace t ...

Inspection
1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. ...

Blower Resistor (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the blower resistor (B) after loosening th ...