Kia Rio: Installation - Canister - Evaporative Emission Control System - Emission Control System - Kia Rio UB 2012-2026 Service ManualKia Rio: Installation

Installation is the reverse of removal.

Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)

Inspection
1. Check for the following items visually. - Cracks or leakage of the canister - Loose connection, distortion, or damage of the vapor hose/tube A ...

On-board Refueling Vapor Recovery (ORVR) valve
...

See also:

Antenna Installation
1. Install the roof antenna, then connect the cable and the connector. 2. Install the rear roof trim. ...

Removal
Engine removal is not required for this procedure.    • Use fender covers to avoid damaging ...

Electric Oil Pump: Circuit Diagram
...

Copyright www.kirmanual.com 2014-2026