Kia Rio: Mirror Replacement - Exterior - Body (Interior and Exterior) - Kia Rio UB 2012-2025 Service ManualKia Rio: Mirror Replacement

Outside Rear View Mirror Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the outside rear view mirror cover (A).


2.
After loosening the mounting bolts, then remove the outside rear view mirror (A).

Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)


3.
Disconnect the outside rear view mirror connector (A).


4.
Installation is the reverse of removal.
Inside Rear view Mirror Replacement
1.
Loosen the mounting screw (C).
2.
Push the inside rear view mirror base (B) up to remove to inside rear view mirror assembly (A).


3.
Installation is the reverse of removal.
Sunroof Adjustment
How To Initialize 1. Check that the glass has been installed. A. Finished height adjustment. 2. ...

Cowl Top Cover Replacement
1. Remove the wiper arm cover (B). 2. After loosening the mounting nuts, then remove the wiper arm (A). Tightening to ...

See also:

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch ...

Foot Actuator (With Auto Defogging System) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to BD group - “Crash pad”) ...

5Door Front Body C
Engine mounting hole (Ø12) Transaxle mounting hole (Ø12) Engine mounting hole (Ø15) ...

Copyright © www.kirmanual.com 2014-2025