1. |
Installation is the reverse of removal.
|
2. |
Use a SST (09581-11000) when installing the brake caliper assembly.
|
3. |
After installation, bleed the brake system.
(Refer to Brake system bleeding)
|
Roll Over Valve (ROV): Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
2.
Remove the roll over valve (A) after releasing ...
Output Speed Sensor Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.85 ~ 1.3)
0.0335 ~ 0.0512
Output volt ...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...