Kia Rio: Intake Manifold: Components

Intake And Exhaust System

...

Intake Manifold: Removal and Installation

1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque : With ...

See also:

Specification
HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) ...

Fluid Service Adjustment Procedure
Oil level Check    A check of ATF level is not normally required during scheduled services. If an oil leak is ...

Installation
1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine charging Sy ...