Kia Rio: Output Speed Sensor Specifications
▷ Type: Hall effect sensor
| Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
| Air gap(mm)in. |
(0.85 ~ 1.3) 0.0335 ~ 0.0512 |
|
| Output voltage |
High |
1.18 ~ 1.68 |
| Low |
0.59 ~ 0.84 |
|
Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of
rotation of the transaxle's turbine shaft and output shaft, and delivers the
readings to the TCM. The sensor provides ...
See also:
Power Mosfet (FATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) and then remove the power mosfet
(B) after loosening the m ...
Emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you h ...
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Copyright © www.kirmanual.com 2014-2025