Kia Rio: Output Speed Sensor Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2026 Service ManualKia Rio: Output Speed Sensor Description

The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Output Speed Sensor Specifications


Input Speed Sensor Installation
1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.85 ~ 1.3) 0.0335 ~ 0.0512 Output vo ...

See also:

Relay Box (Passenger Compartment) Fuse Inspection
1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? ...

Positive Crankcase Ventilation (PCV) Valve: Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.    ...

Exhaust Manifold: Removal and Installation
1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque : Witho ...

Copyright www.kirmanual.com 2014-2026