Kia Rio: Positive Crankcase Ventilation (PCV) Valve: Inspection

1.

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Positive Crankcase Ventilation (PCV) Valve: Removal

1. Disconnect the vapor hose (A) after removing the fixing clip. 2. Remove the PCV valve (B) after unfastening it. ...

Positive Crankcase Ventilation (PCV) Valve: Installation

1. Installation is reverse of removal. PCV Valve installation: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...

See also:

Speakers Installation
Front Speaker 1. Install the front speaker. 2. Install the front door trim. Rear Speaker 1. Install the ...

Fuel Filler Cap
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...

Rear Coil Spring Replacement
1. Remove the rear wheel & tire. (Both RH side and LH side) Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb ...

Categories

Copyright © www.kirmanual.com 2014-2026