Kia Rio: Smart Key

Smart Key Code Saving

1.	Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.

2.	Select the vehicle model and then do "Smart key code saving".

3.	After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below.

4.	After having the teaching smart key, push "ENTER" key.

5.	Input the "Pin code" for first key teaching.

6.	Press the SSB with smart key within 5 sec after pressing "OK".

7.	Confirm the message "First key teaching completed".

8.	Press the SSB with smart key within 5 sec after pressing "OK".

9.	Confirm the message "Second key teaching completed".

10.	Then the screen will be shown as below when key teaching process is completed.

Inspection

Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. The following thr ...

Smart key unit Component

...

See also:

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

4Door Front Body B
Hood hinge mounting hole (Ø11) Fender apron upper member tooling hole (Ø6.6) Engine mounting hole (&O ...

Driver Airbag (DAB) Module and Clock Spring Description
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The ...

Categories

Copyright © www.kirmanual.com 2014-2025