1. |
Install the head lamp leveling actuator by turning the adjusting
gear.
|
2. |
Install the head lamp assembly.
|
3. |
Adjust the head lamp in accordance with the head lamp aiming instructions.
|
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification:
Refer to “Waveform”
...
Weight Classification System (WCS) Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front passenger seat ass ...
4Door Interior
Front pillar trim mounting hole (Ø8.5)
Curtain airbag mounting hole (Ø6.6)
Cowl crossbar mounti ...