Kia Rio: Intake Actuator Description - Blower - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2026 Service ManualKia Rio: Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filtar Replacement
1. Open the glove box. 2. Remove the filter cover (A) by pressing the knob. 3. Replace the air filter ( ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Specification
Item Specification Model Radio / MP3 / CD (PA30A) Radio / MP3 / VCD (BA900/ UVO) Power supply DC 14.4V Load Impedance 4 ...

Auto Defogging Sensor (FATC only) Description
The Auto Defogging Sensor is installed on the front windshild glass. The Auto Defogging Sensor senses moisture on the windshild. The air conditioner control module receives the signal from th ...

Circuit Diagram
...

Copyright www.kirmanual.com 2014-2026