Kia Rio: Timing System

Installation

Installation is in the reverse order of removal. Perform the following : • Adjust a shift cable. • Refill engine with engine oil. ...

Components

1. Timing chain 2. Timing chain guide 3. Timing chain arm 4. Timing chain auto tensionr 5. Timing chain cover 6. Drive belt idler 7. Water pump gasket 8. Water pump ...

See also:

Installation
   • Install the component with the specified torques. • ...

Thermostat: Components
1. Water inlet fitting 2. Thermostat 3. Heater pipe 4. Water temp control assembly 5. Water temperature sensor 6. Gasket ...

Rear Torsion Beam Axle Replacement
[Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...