Kia Rio: Components
| 1. Cylinder head cover 2. Cylinder head cover gasket 3. Cylinder head assembly 4. Cylinder head gasket 5. Camshaft position sensor |
6. Camshaft bearing cap 7. Camshaft front bearing cap 8. OCV (Oil Control Valve) adapter 9. O-ring |
| 1. Exhaust camshaft 2. Intake camshaft 3. Exhaust CVVT assembly 4. Intake CVVT assembly 5. Mechanical Lash Adjuster (MLA) 6. Retainer lock 7. Retainer |
8. Valve stem seal 9. Valve spring 10. Valve spring seat 11. Intake valve 12. Exhaust valve 13. Oil Control Valve (OCV) |
Cylinder Head
...
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging ...
See also:
Removal
1.
Turn ignition switch OFF, and disconnect the negative (-) battery
cable.
2.
Remove the battery and ECM.
(Refer to the Engine Ele ...
5Door Rear Body
Side outer panel rear corner
Tail gate hinge mounting hole (Ø14)
Tail gate hinge mounting hole (Ø1 ...
Rear Washer Switch Inspection
1.
With the rear wiper & washer switch in each position, make sure
that continuity exists between the terminals below. If continuity is
not as specified, replace t ...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2025 Owners Manual
- Kia Rio YB 2017-2025 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2025