Kia Rio: Positive Crankcase Ventilation (PCV) Valve: Inspection

1.

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Positive Crankcase Ventilation (PCV) Valve: Removal

1. Disconnect the vapor hose (A) after removing the fixing clip. 2. Remove the PCV valve (B) after unfastening it. ...

Positive Crankcase Ventilation (PCV) Valve: Installation

1. Installation is reverse of removal. PCV Valve installation: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...

See also:

Flat tire
Jack and tools The spare tire, jack, jack handle and wheel lug nut wrench are stored in the luggage compartment. Remove the luggage under tray out of the way to reach the equipment. (1) Jack ha ...

Radiator: Components
1. Cooling fan & reservoir tank assembly 2. Radiator lower hose 3. Air guard 4. Upper cover 5. Radiator upper hose 6. Filler neck ...

Special driving conditions
Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extr ...

Categories

Copyright © www.kirmanual.com 2014-2026