1. |
Using a screwdriver or remover, remove the mirror (A) from th
mirror holder.
Becareful not to damage to the clip.
|
2. |
Remove the front cover (A), after loosening 3 screws.
|
3. |
Remove the rear cover (A).
|
4. |
Disconnect the mirror connector.Remove the door mirror turn signal
lamp (A) after loosening screw.
|
Cruise control system
The cruise control system allows you to program the vehicle to maintain a constant
speed without depressing the accelerator pedal.
This system is designed to function above approximately 25 mph (40 ...
Inspection
•
Frequent inhalation of brake pad dust, regardless of material
composition, could be ha ...
Back-up Lamp Switch Inspection
1.
Disconnect the back up lamp switch connector (A).
2.
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. W ...