Kia Rio: Circuit Diagram

Wave Form

...

Inspection

1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form� ...

See also:

Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...

Mode Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...

Compressor Oil Specification
1. The HFC-134a system requires synthetic compressor oil (PAG) whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. ...