Kia Rio: Inspection| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the OCV connector.
|
| 3. |
Measure resistance between the OCV terminals 1 and 2.
|
| 4. |
Check that the resistance is within the specification.
|
Circuit Diagram
Removal
Servicing The Electrical System
1.
Prior to servicing the electrical system, be sure to turn off
the ignition switch and disconnect the battery ground cable.
&nb ...
Engine oil
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes ...
Components
1. HECU module
2. Front wheel speed sensor
3. Rear wheel speed sensor
4. Yaw rate & G sensor
5. Steering angle sensor
6. ABS Warning lamp
7. Parking brake/EBD warn ...