Kia Rio: Electric Oil Pump: Removal

1.	Disconnect the negative (-) battery terminal.

2.	Disconnect the Electric Oil Pump (EOP) connector (A).

3.	Remove the under cover (A) after lifting the vehicle with lift.

4.

Remove the Electric Oil Pump (B) after removing the bolts (A-4ea).

Tightening torque:

19.6 ~ 25.5 N.m (2.0 ~ 2.6 kgf.m, 14.4 ~ 18.8 lb-ft)

Electric Oil Pump: Circuit Diagram

...

Electric Oil Pump: Installation

1. Installation is the reverse of removal. ...

See also:

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh ai ...

Appearance care
Exterior care Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the lab ...

Components Location
1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter (LDC) 5. ISG OFF Switch 6. Alternator 7. Starter 8. Brake s ...

Categories

Copyright © www.kirmanual.com 2014-2026